Surface Design Project

-
Surface Design Project

Pattern collection:

  

 

 

 

 

For this project I was drawn to the more organic and funky designs that I came across so when it came time to develop my design I began by playing with those pattern elements.





















I was enjoying this direction but I realized that the pattern could go on forever so I decided to use the honeycomb as a parameter for my pattern. During our peer review I got feedback that the squiggly lines and and little guys were so fun and cute so I made them the focus of the pattern.



 




Because I chose a pattern that was so organic and illustrative, the control point curve was my main tool. I tried using offset for the circles that have circles within them but I decided it was too uniformed next to the rest of the design and ended up drawing them in anyway. In order to make sure my pattern lined up on all edges for when I finally "arrayed" the pattern, I used move with Osnap & Mid on to align the edges.



 
 For the colour application in this design I referenced one of my pattern images that contained my desired colour palette. I assigned 7 different colours to new layers in my file and using the Hatch command filled in my pattern.





I then turned off my curves layers and followed the printing process to save the png. 

  

I think this pattern turned out so cute and would be an awesome design for kids bedsheets or maybe a shower curtain.




Comments

Post a Comment

Popular posts from this blog

Reverse Engineering: Hobby Electronic Part 03

-
Image
BUILD IT AND THEY WILL COME said no one In the final chapter of this project I built the last 7 pieces of my object in rhino. 1,5,6,10,11,13 &14 5,11,12,13 5, 11 & 12 were very simple and mostly involved using sweep1. 13 was some simple surface designing.  1,6,10 Piece 10 mostly consisted of surface design.  Piece 1, the plug, required a more creative approach. The plug had these alternating negative shapes going up the shaft that were like little corners that were cut away, accept the tip of each corner was cut off to make the space for where the wiring goes.     In order to achieve this patterning I lined up square chips in the pattern that they appeared on the plug, then boolean differenced the cord itself and used what remained to boolean difference the plug in order to recreate this pattern. After completing all parts of the object I was able to put the pieces together. To render I used keyshot. I ran into an issue where the foam piece of the headph...
Read more

Reverse Engineering: Hobby Electronic Part 02

-
Image
  Continuing on with this reverse engineering project, I was able to very quickly craft the nuts that went with the screws by extruding a hexagon and using Boolean Difference with the already made screw in order to create the threads.   The next piece I chose to make for my object were number 4 & 4.1. These two pieces were close to being the same but did have some different details, one being a female and and the other a male end, along with some exterior differences.  These were designed by taking measurement after measurement with my digital caliper and applying the surface design as far as I could take it. After completing the first one I then went back and reused the geometry to build the second one.  This was the conclusion of this work space. Starting in a new Rhino file I began working on the ear pieces, 8,9 & 14. Piece #14 was probably the trickiest one. because its a shell I set up my geometry and tried to loft it. Unfortunately the curves weren...
Read more

Part 4 : Sculpting Model & Fixing meshes

-
Image
HAIR In order to make the hair I learned how to apply a curve to a path. I could do this by selecting the path, going into the data tab, geometry, bevel, object, and using the eyedrop tool, select the curve shape that I want applied. I could then scale the different points along the curve with alt + S to close the ends for the pointed shape, as well as widen and narrow the strands. All of her hair is made with the example on the right. the left is her eyebrows. To make her ears I created a plain using shift + A, subdivided it and shaped it using editing and modeling tools. I then added a thickness modifier.  The horns were made with a cylinder that I extruded (edit mode) into the shape from the beginning to end of the horn. I applied subdividing mods and used modeling tools to refine the shape.    To sculpt the face I followed along with this tutorial:  https://www.youtube.com/watch?v=BPAvvF8py1M&ab_channel=CGBoost starting with a sphere, as if it were a ball of ...
Read more